VyroidUser Manual Open app

Vyroid Manual

Vyroid is a painting and animation app that runs in your browser. Draw with natural brushes, organise your art in layers, build a skeleton to pose characters, and turn frames into animations — all in one file, with no install.

Paint

45 brushes in six groups, shapes, fills, gradients, text and liquify.

3D

Import .glb and .gltf models and place them as 2.5D layers.

Organise

Layers with blend modes, groups, masks, clipping and adjustment layers.

Animate

Frame timeline with onion skin, plus a skeleton you can pose and bind to your drawings.

Share

Export PNG, JPEG, WebP, AVIF, layered PSD, GIF, video and sprite sheets.

Your first five minutes

  1. Open the app. On the Start page choose New canvas, pick a size preset, or drag an image into the window.
  2. Press B for the Brush. Pick a colour on the left and drag on the canvas.
  3. Add a layer with the + button in the Layers panel, so you can draw without touching your first sketch.
  4. Made a mistake? Press Ctrl+Z. Press E to erase.
  5. Save with Ctrl+S (a .vyroid project) or export a picture with Ctrl+E.
Tip

Press ? at any time to see every keyboard shortcut, or Ctrl+K to search every command by name.

The interface

The screen has five areas. Everything can be reached with the mouse, touch or the keyboard.

AreaWhat it holds
Top barProject name (click to rename), the menus File, Edit, Select, Layer, Image, Filters, View, Window, quick buttons for undo/redo, cut/copy/paste, flip, zoom, grid, rulers and snap, the ? shortcuts button, the theme toggle and the animation timeline button.
Project tabsEach open project has a tab. Use + to open another canvas. The Start tab returns to the start page.
Tool columnAll tools. Hover a tool to see its name and key. Tools with a small triangle hold a group: press the key again to cycle.
Options barSettings for the active tool: size, opacity, hardness, flow, brush choice, shape type and more.
Side panelsColors, Layers, History and (when used) Skeleton. Drag a panel tab to move it. Use Window ▸ Reset panel layout if you lose one.

Focus mode

Press Tab to hide all panels and draw on a clean screen. Press it again, or tap Show panels, to bring them back.

Phones and tablets

On narrow screens the panels are folded away. Tap the stacked-layers button to open or close them. Use a stylus for pressure-sensitive strokes where your device supports it.

Projects and files

ActionHow
New canvasFile ▸ New canvas… (Ctrl+N). Choose a preset or type a custom width and height.
OpenFile ▸ Open… (Ctrl+O) or drag an image or .vyroid file into the window.
Add image as layerFile ▸ Add image as layer… places a picture on its own layer in the current project.
SaveFile ▸ Save project (.vyroid) (Ctrl+S) keeps layers, animation frames and skeleton.
RenameClick the project name in the top bar.
Print / CloseCtrl+P prints. Close project and Close all projects ask before discarding changes.
Autosave

Your work is autosaved in the browser. If the page closes by accident, the Start page offers to restore the last session. Autosave is a safety net, so still save .vyroid files you care about.

Tools

Choose a tool in the tool column or press its key.

ToolKeyWhat it does
BrushBPaints with the selected brush. Press again to cycle brushes.
PencilPHard-edged drawing.
EraserERemoves paint from the active layer.
SprayKSoft spray of dots.
Freehand lineFSmooth line that follows your stroke.
CurveCDrag a line, then bend it with two more drags. Enter finishes, Esc cancels.
ShapesULine L, Rectangle R, Rounded rectangle W, Ellipse O, Triangle Y, Polygon N, Star S, Arrow A, Polyline Shift+L, Bézier curve Shift+C.
Fill bucketGFills a region of similar colour.
GradientDDrag to draw a gradient from the primary to the secondary colour. Choose its type in the options bar.
TextTClick to type, Enter places the text, Shift+Enter adds a new line, Esc cancels. Fonts… lets you add your own fonts. See Text styling for effects.
SelectionMRectangle select. J ellipse, Q lasso, plus a magic wand. Press M again to cycle.
Move / transformVMove, resize and rotate the active layer.
EyedropperIClick to pick a colour from the picture.
ZoomZClick to zoom in, Alt+click to zoom out.
HandHDrag to pan.
3D modelcube iconMove, rotate and scale an imported 3D model. See 3D models.
LiquifytoolbarPush, bloat, pinch and twirl pixels to reshape your art.
SkeletonJBuild joints and bones for posing. See Skeleton and bones.
Shared keys

A few tools can share a key. If a key does not switch to the tool you expect, check View ▸ Custom shortcuts…, where you can set your own.

Text styling

With the Text tool active, the options bar has these settings. Most preview live while you type; Arch, gradient and rainbow Fill, and 3D depth appear once you place the text.

OptionWhat it does
Style: B I U SBold, italic, underline and strikethrough.
Letter spacingSpace between letters. Negative values tighten the text.
Line heightSpace between lines (60%–300%).
RotateTurns the text from −180° to 180°.
Arch / curveBends text along an arc. Positive curves up like a rainbow, negative curves down.
CaseAs typed, UPPERCASE, lowercase or Title Case.
FillSolid colour, a gradient (horizontal, vertical or diagonal) from the primary to the secondary colour, or rainbow.
OutlineAdds an outline of the chosen width and Outline color.
ShadowDrop shadow with blur, X and Y offset, and Shadow color.
GlowSoft halo in the primary colour. Higher values spread it wider.
3D depthExtrudes the text down and to the right in the 3D color.
Tip

Combine effects: a thick outline, 3D depth and a soft shadow make bold sticker-style titles. Text is painted onto the active layer, so use a separate layer if you want to move it later.

Size and panning shortcuts

[ and ] change brush size. X swaps the two colours. Hold Space and drag to pan with any tool.

Brushes

Open the brush picker from the Brush tool options (the button showing the current brush name). Brushes are sorted into groups:

GroupExamples
BasicSoft round, Hard round, Airbrush, Marker, Chisel marker, Flat brush, Pixel, Neon, Plain line
Pens & inkInk pen, Brush pen, Technical pen, Gel pen, Fountain pen, Tapered liner, Calligraphy
PaintWatercolor, Round brush, Filbert, Soft blender, Glaze, Oil paint, Dry brush, Bristle, Splatter
Dry mediaChalk, Charcoal, Graphite, Sketch pencil, Crayon, Pastel, Hatching
Texture & funConfetti, Stipple, Sparkle, Petals, Grass, Fur
Pixel artPixel art

Brush settings

  • Size, Opacity, Hardness and Flow sliders in the options bar. Double-click a slider to reset it.
  • Stabilizer smooths shaky lines. Choose a mode such as Rope (lazy brush) for long clean curves.
  • Symmetry mirrors strokes while you draw.
  • Pressure from a stylus changes size and strength on brushes that support it, such as the pens.
  • Brush editor lets you tweak a brush, draw a test stroke on a light, dark or grid background, duplicate it, and import or export your own brushes.
Tip

For clean lineart use Ink pen or Tapered liner with a little stabilizer. For soft shading use Soft blender with low flow.

Colors and palettes

  • The primary colour paints; the secondary is used by gradients and for some fills. Click either swatch to edit it.
  • Click a palette swatch to set the primary colour; right-click to set the secondary.
  • Recent colours are remembered under the swatches.
  • Use the Eyedropper I to pick any visible colour.

Color palettes

Open the palettes dialog to work with sets of colours.

ButtonResult
Load / Save as… / DeleteManage your named palettes.
From imageExtracts 4–24 colours from the picture.
From primaryBuilds a harmony: complementary, analogous, triadic, split-complementary, tetradic or shades.
Apply to swatches / Add primaryUse the working palette as your swatch bar, or add the current colour.
Export .gpl / Import…Share palettes with other painting programs.
DefaultRestore the built-in swatches.

Layers

Layers are transparent sheets stacked on top of each other. Paint on one without disturbing the rest.

Layers panel buttons

New layer, Duplicate, Move up, Move down, Merge down, Delete, Group, Layer mask, Clip to layer below, and More options. Right-click any layer for the full menu.

Each layer row

  • Eye shows or hides it. Alt+click the eye to show only that layer.
  • Lock prevents edits. α (or /) locks transparency, so you can only recolour existing pixels.
  • Name: double-click to rename. Drag the grip to reorder.
  • Opacity and Blend mode: Normal, Multiply, Screen, Overlay, Lighten, Dodge, Burn, Hard light, Soft light, Difference and more.

Advanced layers

Groups

Collect layers in a folder with its own opacity and visibility.

Masks (▣)

Hide parts of a layer without erasing. Click again to leave mask editing.

Clipping (⬒)

Restrict a layer to the shape of the layer below, ideal for colouring inside lineart.

Adjustment layers

Non-destructive Brightness / Contrast, Hue / Saturation and similar changes. Use the adjustment button in the Layers panel.

Layer menu

Beyond the buttons, Layer offers properties, move/transform, flip, center content, clear, fill, bring to front, send to back, show all layers, merge visible and flatten image.

3D models (2.5D layers)

You can place a 3D model in your picture. Vyroid draws the model into an ordinary layer, so the canvas stays 2D: you can still stack layers, paint around the model, use blend modes and export as usual. This is sometimes called a 2.5D layer.

Importing a model

  1. Open a project, then choose File ▸ Import 3D model (.glb, .gltf)…. You can also drag a model file onto the canvas, or use File ▸ Add image as layer… and pick a model.
  2. A new layer with a 3D badge appears at the top, showing the model in the middle of the canvas.
  3. For a .gltf file that comes with a separate .bin and texture images, select all of those files together. A single .glb file is easiest.

Moving, rotating and scaling

Click the cube tool in the toolbar, or click the 3D badge on the layer, to edit the selected 3D layer. Choose a mode in the options bar, then drag on the canvas:

ModeDrag to…
MoveSlide the model across the canvas.
RotateTurn the model: left and right spin it around, up and down tilt it. Hold Alt and drag sideways to roll it.
ScaleDrag up to make it bigger, down to make it smaller.
PoseBend the model through its rig: drag a joint to move its bone. See Posing with the rig below.

Hold Shift while dragging to move in any mode. For precise values, use the panel sections: Position, Rotation and Size & light. The section for your current mode opens automatically, and each section header shows its current values even when closed. Double-click a value to type a number, or double-click a slider's name to reset just that slider. Reset transform puts the model back in the centre at its original size and angle (a pose is kept). Every change can be undone with Ctrl+Z.

3D shapes

No model file needed: pick the 3D shapes tool (the cube-and-ball icon next to the 3D model tool) and use Add a 3D shape to add a cube, sphere, cylinder, cone, pyramid, torus, capsule, gem or knot as a new 3D layer. Move, rotate, scale, light and pose it like any other 3D layer. Selecting a shape layer shows Shape material in the same panel. More 3D controls… opens the 3D model tool for position, light, shader and outline:

ControlWhat it does
ShapeSwitch the layer to a different shape.
ColourThe base colour (also the background of a texture).
Texture, Pattern colour, Texture tilesChecker, stripes, dots, grid, bricks, wood, noise, or Your image… (up to 2 MB). Tiles sets how many times it repeats.
Metal / RoughnessMetal makes the surface mirror-like; roughness blurs reflections. Low roughness and high metal look like chrome.
Reflection coatA glossy clear layer on top, like car paint or lacquer.
GlowMakes the shape emit its own light in its colour.

Shapes are saved with your project and can be changed at any time. Reflections come from the built-in studio lighting, so they follow Brightness and the Shader setting (styles other than Original (PBR) ignore Metal, Roughness and Reflection coat).

Light and look

The Size & light and Shader sections of the 3D options change how the model is lit and drawn. None of these change the model file itself, and they can all be undone with Ctrl+Z.

ControlWhat it does
BrightnessHow strong the lighting is, from 10% to 300%. Around 100% is normal. Bright areas are softened automatically so white clothes do not turn into a flat white shape.
Light: Direction / Height / ColourWhere the main light comes from and its colour. On the canvas, drag the sun handle around its dotted ring: inside the ring is a light from the front, the rim is a side light, and a hollow sun means the light is behind the model. Reset light restores the default.
ShaderThe drawing style: Original (PBR) keeps the model's own materials, and the others give a stylised look: Toon / cel, Clay, Normals, Rim glow, Hologram, Halftone, Sketch hatch, Pearl, Posterize and Duotone. Amount, Detail and Colour tune the chosen style.
Outline and Ink colourDraws an outline around the model. Outline is 0% by default. Parts that are see-through or cut out, such as hair cards and leaves, are left out of the outline so they do not turn into solid shapes.
Group codeIn Size & light. Type a number (1 or higher). Models with the same code show each other in their reflections, so a chrome ball can mirror the cube next to it. Models with different codes, or 0 (off), ignore each other. Reflections show on glossy materials with the Original (PBR) shader.
OpaqueA button next to Import… and Rasterize. Turn it on to ignore the model's transparency if parts such as clothes or ropes look missing or faded. It can make hair cards and glass look solid, so leave it off unless you need it.

Posing with the rig

If the model has a skeleton (a rig), you can pose it like a mannequin. Choose Pose in the 3D options bar. The skeleton appears on top of the model: white dots are joints, the red dot is the root, and lines are bones. Models without a rig show a message instead; rigged .glb files, for example from Mixamo or Blender, work best.

ControlWhat it does
Swing (default)Drag a joint and its bone swings so the joint follows your pointer. Dragging a wrist bends the arm at the elbow, dragging an elbow swings the upper arm, and so on. The bone that moves is highlighted in orange.
TurnClick a joint to select it, then drag anywhere to spin that joint in place. Hold Alt and drag sideways to roll it. Use this for twisting a head, a wrist or the hips.
HoverMove the pointer over a joint to highlight it and see its name before you click.
Up / Down / Prev / NextStep from the selected joint to its parent, its child, or the neighbouring joint at the same level. Handy for small joints that are hard to hit on the canvas. The Jump to joint list picks any joint by name.
Bend X / Twist Y / Side ZExact rotation of the selected joint, in degrees, relative to its original pose. Double-click a value to type it, or the name to reset it.
FingersOn models with many joints, small ones (fingers, toes, eyes) are hidden to keep the rig readable. Turn Fingers on to show them.
Reset joint / Reset posePut the selected joint, or the whole model, back in its original pose.
Skeleton switchShow or hide the skeleton guide (switching to Pose mode turns it on). It is only a guide on the canvas: it is never drawn into your layer or exported, and Vyroid remembers your choice.

Hold Shift while dragging to move the whole model. Every pose change can be undone with Ctrl+Z, and the pose is saved in your .vyroid project. The pose is the same on every animation frame; to use different poses in different frames, pose the model, then select the next frame and pose it again (each frame keeps the picture you last rendered on it).

Good to know

  • A 3D layer is locked so you do not paint over it by accident. Choose Rasterize to turn it into a normal layer you can paint on. After that it can no longer be moved or rotated as a 3D model.
  • The model is saved inside your .vyroid project, so you can reopen and keep posing it. Large models make project files bigger.
  • The 3D engine downloads from the internet the first time you use it, so an internet connection is needed for the first import or edit. Compressed models (Draco, Meshopt) and compressed textures (KTX2) are supported. Animations inside the model are not played; you get its still pose.
  • Duplicating a 3D layer keeps it editable. Merging, flattening and exporting treat it as ordinary pixels.
  • With animation frames, each frame keeps the picture you last rendered on it. Select the frame you want, then pose the model.
  • Vyroid also understands older model materials (specular-glossiness), models whose colours are stored only as a glow (emissive) texture, vertex colours, texture offsets and tiling, and morph targets. If a model still looks wrong, try Opaque, change the Shader, or adjust Brightness and the light.
  • Models up to about 80 MB are accepted. Very detailed models can feel slow while you drag; the picture sharpens when you let go.

Selections and transforms

Select an area with M (rectangle), J (ellipse), Q (lasso) or the magic wand. Painting and filters then only affect the selection.

CommandWhere
Select all / DeselectCtrl+A / Ctrl+D
Invert, Grow, Shrink, SmoothSelect menu
Select layer contentSelect menu: selects the painted pixels of the active layer
Cut, Copy, Paste, ClearCtrl+X, C, V, Del
Fill / Stroke selectionEdit menu
Flip / rotate selectionTop-bar buttons or Select menu
Free transformCtrl+T. Enter applies, Esc cancels.

The Move tool V transforms a whole layer: drag to move, use the handles to resize and rotate. Reset undoes the change, Apply commits it.

Animation

Open the timeline with the film button in the top bar (or Window ▸ Animation timeline). Each frame holds its own drawing.

Working with frames

  • New blank frame starts empty; Duplicate copies the current frame.
  • Move frames left or right, delete frames, and jump to the first or last frame.
  • Step with , (previous) and . (next).
  • Play / pause and Loop preview the motion. Set FPS for speed.
  • Hold keeps one frame on screen for several frame-times without duplicating it.
  • Pin layer makes a layer, such as a background, appear on every frame.

Onion skin

Choose Onion ±1 or ±2 to see faint neighbouring frames: red for earlier, blue for later. This helps keep motion smooth.

Exporting animation

Click Export on the timeline. Choose a Format: Animated GIF, Video, PNG frames, or a sprite sheet. Also choose a size and a background.

Layer keyframes (move, rotate, scale, fade)

Open Window ▸ Layer motion. Select a layer, go to a frame, and change X, Y, Rotate, Scale or Opacity (or press Set key). Go to another frame and change a value again. Every frame between two keys is filled in automatically. Small diamonds on the timeline mark frames that have a key for the selected layer, and the numbered buttons under the fields jump to them.

  • Ease to next key sets how the movement behaves until the next key: Linear, Ease in, Ease out, Ease in/out, Bounce, Elastic, Overshoot or Hold (a sudden jump).
  • Moving a layer never changes its pixels. The motion is applied when you preview, play and export (GIF, video, PNG frames, sprite sheet). Untick Preview motion on the canvas to see the layer unmoved. While preview is on, painting on a moved layer lands under your pen.
  • Pivot is the point a layer rotates and scales around (the middle of the canvas by default). On artwork puts it in the middle of the drawing.
  • Keys belong to frame numbers. Inserting, deleting or reordering frames does not move them. Single-image exports and Flatten use the layer as drawn, without motion.

3D gizmo

With the 3D model tool, a gizmo appears on the selected 3D layer. The red arrow moves it sideways only, the green arrow up and down only, and the white square moves it freely. Drag the ring to roll it, the purple dot to turn it left and right, and the blue dot to tip it up and down. Drag a corner square of the dashed box to scale. The part you are dragging turns orange. Dragging anywhere else still works as before, using the Move / Rotate / Scale mode.

Animated 3D layers

Select a 3D layer, pose the model with the cube tool and press Key 3D here in Layer motion. Go to another frame, pose it again and key it. Position, rotation and scale are filled in between the keys with the chosen easing. Once a 3D layer has keys, any edit you make with the 3D tool on a frame updates the key for that frame.

  • Turntable 360° creates two keys for a seamless full spin across all frames (add your frames first).
  • The frames are rendered ahead of time, so playback and export stay fast. After adding, deleting or moving frames, press Bake frames. The 3D engine needs an internet connection the first time it is used.
Need at least two frames

Playback and export need two or more frames. If you see “Add a second frame first”, add a new frame.

Skeleton and bones

The skeleton lets you pose a character by dragging joints, then makes your drawings follow along. It works with or without animation frames.

Build mode

  1. Press J to choose the Skeleton tool.
  2. Click the canvas to place the first joint (the red root), then keep clicking to extend the chain. Or press Template for a ready-made figure.
  3. Select a joint and click empty space to attach a new bone. Drag a joint to move it (Shift moves it with its children).
  4. Esc or Deselect to start a new chain.

Pose mode

Drag a joint to rotate its bone and everything below it. Dragging the root joint moves the entire figure.

Binding drawings to bones

  1. Draw one body part (arm, leg, head…) on its own layer, in the pose you want as the rest pose.
  2. Pick a bone in the Bone binding section and press Bind layer. The nearest bone is pre-selected.
  3. Pose the skeleton: the layer follows its bone. Unbind releases it and keeps its current look. A ⚯ badge on a layer shows what it is bound to.

Bending limbs

Bound layers are stiff by default. Select a bound layer and raise Bend under the Bone binding buttons. Around its joints the layer then blends with the neighbouring bones (the parent bone at the start, the first child bone at the end), so arms and legs curve instead of folding. Use the same value on both parts of a limb so they meet cleanly. Bend needs WebGL, and layers bound in older versions must be unbound and bound again once to enable it. Strokes drawn near a bent joint may land slightly off, so paint the part before raising Bend.

Automatic in-betweens

Pose the skeleton on one frame and on a later frame (for example frames 1 and 8). On the timeline, set Pose in-betweens: frame to the first and to to the last, choose an Ease (Linear, Ease in, Ease out, Ease in/out, Bounce, Elastic, Overshoot, Hold) and press Fill in-betweens. The frames between get poses automatically. Bone angles and lengths are interpolated, so limbs swing along an arc and keep their length. Bound layers are redrawn on every filled frame, and the whole fill is one undo step. Both end frames must already be posed.

Other skeleton buttons

ButtonWhat it does
FloatDetaches the skeleton bar into a floating window.
Show / hideToggles the skeleton overlay without deleting it.
BakeDraws the skeleton onto the active layer using your current colour and brush size.
Pose → nextCopies this pose to the next animation frame, ready for a small change.
Save pose / As new frameStore poses in the pose library and apply them to new animation frames. Built-in poses come from the Template skeleton.
Animation recipe

Build a skeleton, bind your limbs, open the timeline, then repeat: Pose → next, adjust the joints slightly, play. Each frame keeps its own pose.

Filters and image tools

Filters menu

Filters apply to the active layer, or to the selection if there is one. Each opens a dialog with a slider.

Brightness, Contrast, Saturation, Hue rotation, Grayscale, Sepia, Invert, Gaussian blur, Box blur, Sharpen, Pixelate, Noise, Vignette, Posterize, Threshold, Color temperature, Edge detect, Emboss, Motion blur and Glow.

Image menu

CommandUse
Resize / scale…Change canvas or image size. Also Double size and Half size.
Crop to selection · Trim transparent edges · Add border…Tidy the canvas edges.
Rotate 90° / 180° / by angle…Turn the whole image.
Flip horizontally / verticallyMirror the whole image. Good for spotting drawing errors.
Image information…Shows size and details.

View and navigation

ActionHow
ZoomMouse wheel (zooms at the cursor), + / −, Fit to screen, or 1:1 for actual size.
PanHold Space and drag, use the Hand tool, or Shift + wheel to pan sideways.
Rotate canvas, and . rotate in steps; Alt + wheel rotates freely. The panel also offers −15°, +15° and Reset.
Grid, rulers, snapToggle in the top bar or View menu. Grid size… changes spacing.
Reference windowShow a floating picture to copy from without putting it on your canvas.
Paint outside canvasEdit ▸ Paint outside canvas lets strokes continue past the edge.

Make it yours

  • Light / dark theme button in the top bar.
  • Themes… and UI colors… change the look. Pick an accent quickly or reset any colour with ↺.
  • Command palette (Ctrl+K) finds any command by name.
  • Custom shortcuts… remaps keys.

Exporting

Press Ctrl+E or choose File ▸ Export as….

FormatBest for
PNGLossless pictures with transparency.
JPEGSmall photos. Has a Quality slider. Transparent areas become white.
WebPSmall files for the web, with a Quality slider.
AVIFVery small files that keep transparency, with a Quality slider. Some browsers have no built-in AVIF encoder, so the first export may download one and need an internet connection. Large canvases can take a few seconds.
PSD (layers)Opens in Photoshop and similar programs with one PSD layer per layer. Group opacity, visibility, masks and clipping are baked into each layer. Limit: 30,000 px per side.
GIF / video / PNG frames / sprite sheetAnimation. Use Export in the timeline.
TimelapseFile ▸ Export timelapse… replays how your drawing was made.

To keep editing later, save as a .vyroid project instead. Exported pictures are flat or PSD and cannot restore your skeleton or animation.

Keyboard shortcuts

On a Mac, use Cmd in place of Ctrl.

Tools

B Brush · P Pencil · E Eraser · K Spray · F Freehand · C Curve · U Shapes · G Fill · D Gradient · T Text · M Select · J Ellipse select / Skeleton · Q Lasso · V Move · I Eyedropper · H Hand · Z Zoom

Shapes

L Line · R Rectangle · W Rounded · O Ellipse · Y Triangle · N Polygon · S Star · A Arrow · Shift+L Polyline · Shift+C Bézier

Edit

Ctrl+Z Undo · Ctrl+Y Redo · Ctrl+X/C/V Cut/Copy/Paste · Del Clear · Ctrl+A Select all · Ctrl+D Deselect · Ctrl+T Free transform

Painting

[ ] Brush size · X Swap colours · / Lock transparency · Enter Apply · Esc Cancel · ⌫ Remove last point

View

+ − Zoom · Space+drag Pan · Tab Hide panels · Ctrl+K Command palette · ? Shortcut list

File

Ctrl+N New · Ctrl+O Open · Ctrl+S Save · Ctrl+E Export · Ctrl+P Print

Extra: tips and troubleshooting

Good habits

  • Sketch on one layer, ink on another, colour below the ink. Lock transparency (/) to recolour without going outside the lines.
  • Use Clip to layer below for shading that stays inside a shape.
  • Flip the image horizontally now and then to catch proportion mistakes.
  • Open several projects in tabs to copy and paste between them.
  • Save .vyroid projects often, and export a PSD for a backup you can open elsewhere.

Common questions

ProblemTry this
A panel disappearedPress Tab if you are in focus mode, or use Window ▸ Reset panel layout.
I can’t paint on a layerThe layer may be hidden, locked or on a mask. Check the eye and lock, and click the layer to select it.
Strokes stop at the canvas edgeTurn on Edit ▸ Paint outside canvas if you want to paint past it.
A shortcut does nothingAnother tool may share the key, or the keyboard focus is in a text box. Click the canvas and try again, or review Custom shortcuts….
My session closedReopen the app and choose to restore the autosaved session from the Start page.
Animation export failsMake sure the timeline has at least two frames. Try GIF if your browser does not support video export.
The page feels slowLower the canvas size, merge layers you no longer need, and close unused project tabs.